No equipment room, no problem! The PurClean Xtreme Environment System has been engineered to withstand the harsh environment of a wash bay. The uniquely designed Xtreme Environment system with its attractive fiberglass cover and stainless steel frame provides the necessary protection required when an in-bay installation is your only available option.

Contact us about your spot free rinse system needs!

WATER STABILIZER (REPLACES WATER      SOFTENER)     INLET AND PRESSURE GAUGES     CARBON TANK W/ AUTO BACK FLUSHING HEAD    MULTI-STAGE PRESSURE PUMP    LOW PRESSURE SHUT OFF    AUTOMATIC MEMBRANE FLUSH    PRODUCTION AND REJECT METERS    ON BOARD TDS METER   TWO STEP POWDER COATED FRAME    ALL SYSTEMS ARE ETL LISTED    REPRESSURIZATION PUMP (24V OR      110V ACTIVATION)    THIN FILM MEMBRANES    COLORS BLUE AND WHITE

WATER REQUIREMENTS 
TWO 1" WATER LINE W/FPT BALL VALVES, 20 GPM AT 30 PSI. MOUNT 4 FEET UP FROM FLOOR TO THE RIGHT OF THE SPOT-FREE RINSE SYSTEM AND (1) DRAIN

ELECTRIC REQUIREMENTS 
ONE 220 VOLT 20 AMP SINGLE PHASE CIRCULT WITH ITS OWN L6-20 LOCKING RECEPTICAL.  PUT THE PULG 5 FEET UP FROM THE FLOOR TO THE RIGHT OF THE SPOT-FREE RINSE SYSTEM.

RO OUTPUT
PRODUCTION - 2.1 GPM

REJECT 
REJECT - 2.3 GPM 

RO MOTOR
1-1/2 HP FLINT & WALLING BOOSTER PUMP

RO MOTOR AMPS
10.5 

RO MOTOR VOLTAGE
208-230 VOLTS

DIMENSIONS (ON WALL)
30" WIDTH X 44" TALL X 12" DEEP

NET WEIGHT
500 LBS 

DELIVERY PUMP
STANDARD DELIVERY PUMP 15 GPM MAX AT 50 PSI MAX AUTOMATIC FRESH WATER BYPASS PRESSURE AND GPM VARIES DEPENDING ON WHICH CAR WASH APPLICATION (CALL NEW WAVE INDUSTRIES FOR MORE INFO)

WATER STABILIZER (REPLACES WATER SOFTENER)     INLET AND PRESSURE GAUGES     CARBON TANK W/ AUTO BACK FLUSHING HEAD    MULTI-STAGE PRESSURE PUMP    LOW PRESSURE SHUT OFF    AUTOMATIC MEMBRANE FLUSH    PRODUCTION AND REJECT METERS    ON BOARD TDS METERS    TWO STEP POWDER COATED FRAME    ALL SYSTEMS ARE ETL LISTED    REPRESSURIZATION PUMP (24V OR 110V ACTIVATION)    THIN FILM MEMBRANES    COLORS BLUE AND WHITE

WATER REQUIREMENTS 
TWO 1" WATER LINE W/FPT BALL VALVES, 20 GPM AT 30 PSI. MOUNT 4 FEET UP FROM FLOOR TO THE RIGHT OF THE SPOT-FREE RINSE SYSTEM AND (1) DRAIN

ELECTRIC REQUIREMENTS
ONE 220 VOLT 20 AMP SINGLE PHASE CIRCULT WITH ITS OWN L6-20 LOCKING RECEPTICAL.  PUT THE PULG 5 FEET UP FROM THE FLOOR TO THE RIGHT OF THE SPOT-FREE RINSE SYSTEM.

RO OUTPUT
PRODUCTION - 3.1 GPM

REJECT 
REJECT- 2.3 GPM 

RO MOTOR

1-1/2 HP FLINT & WALLING BOOSTER PUMP

RO MOTOR AMPS
10.5

RO MOTOR VOLTAGE
208-230 VOLTS

DIMENSIONS (ON WALL)
30" WIDTH X 44" TALL X 12" DEEP

NET WEIGHT
500 LBS

DELIVERY PUMP
STANDARD DELIVERY PUMP 15 GPM MAX AT 50 PSI MAX AUTOMATIC FRESH WATER BYPASS PRESSURE AND GPM VARIES DEPENDING ON WHICH CAR WASH APPLICATION (CALL NEW WAVE INDUSTRIES FOR MORE INFO)

WATER STABILIZER (REPLACES WATER SOFTENER)    INLET AND PRESSURE GAUGES    AUTO BACK FLUSHING CARBON HEAD   MULTI-STAGE PRESSURE PUMP   LOW PRESSURE SHUT OFF   AUTOMATIC MEMBRANE FLUSH   PRODUCTION AND REJECT METERS   ON BOARD TDS METER   TWO STEP POWDER COATED FRAME (BLUE OR WHITE)   ALL SYSTEMS ARE ETL LISTED   REPRESSURIZATION PUMP (24V OR 110V ACTIVATION)   THIN FILM MEMBRANES   OPTIONAL STAND MOUNT

WATER REQUIREMENTS 
TWO 1" WATER LINE W/FPT BALL VALVES, 20 GPM AT 30 PSI. MOUNT 4 FEET UP FROM FLOOR TO THE RIGHT OF THE SPOT-FREE RINSE SYSTEM AND (1) DRAIN

ELECTRIC REQUIREMENTS 
ONE 220VOLT 20 AMP SINGLE PHASE CIRCUIT WITH ITS OWN L6-20 LOCKING RECEPTACLE. PUT PLUG 5 FEET UP FROM THE FLOOR TO THE RIGHT OF THE SPOT-FREE RINSE SYSTEM.

RO OUTPUT
PRODUCTION - 0.7 GPM

REJECT
0.9 GPM

RO MOTOR
1 FLINT & WALLING BOOSTER PUMP (1 HP MOTOR)

RO MOTOR AMPS
9 

RO MOTOR VOLTAGE
208-230 VOLTS

DIMENSIONS (ON WALL)
30" WIDTH X 36" TALL X 12" DEEP

NET WEIGHT
350 LBS

DELIVERY PUMP
STANDARD DELIVERY PUMP 15 GPM MAX AT 50 PSI MAX AUTOMATIC FRESH WATER BYPASS PRESSURE AND GPM VARIES DEPENDING ON WHICH CAR WASH APPLICATION (CALL NEW WAVE INDUSTRIES FOR MORE INFO)

The addition of a PurClean Spot-Free Rinse system at a Self Service wash location will enhance the wash experience for the consumer by providing added value while generating an additional profit center for the Operator. The pure, mineral-free water produced by the PurClean system can also be used to provide the perfect chemistry for chemical delivery and eliminate the use and ongoing expense of a water softener.

Contact us about your spot free rinse system needs!

Many wash sites have designed huge glass windows into the buildings of their washes to allow the consumer to view their vehicle going through the wash process; some of the newer carwashes are housed in attractive glass buildings to provide additional exposure and further promote the wash site. The addition of the optional PurClean Spot-Free Glass Rinse feature provides the Operator with an efficient, cost-effective system that is programmed to spray spot-free water through a uniquely designed manifold onto the glass to eliminate chemical residual, hard water and dirt build-up.

Contact us about your spot free rinse system needs!

• PUR-CLEAN WATER STABILIZER ELIMINATING THE NEED FOR A WATER SOFTENER
• HIN FILM MEMBRANES
• INLET AND PUMP PRESSURE GAUGES
• CARBON TANK WITH AUTO-BACKFLUSHING
• MULTI-STAGE PRESSURE PUMP
• LOW-PRESSURE SHUT-OFF
• SIMPLE RETROFIT FOR EXISTING WASHES
• PRE-BUILT MANIFOLD FOR EASY HANDLING
• SCHEDULE 80 PVC
• CHECK VALUES FOR INSTANT ACTIVATION AND MINIMAL WATER USE
• MULTIPLE TIMER OPTIONS INCLUDING CAR COUNT
• CUSTOM PUMP OPTIONS AVAILABLE
• ALL SYSTEMS ARE ETL LISTED